Framing Nails – Cement Coated & Hot-Dipped Galvanized Durable framing nails available in cement-coated and hot-dipped galvanized finishes. Stocked in 1 lb, 5 lb, and 25 lb boxes in various sizes. Cement-coated nails offer excellent holding power, ideal for interior framing or general wood projects where corrosion is minimal. Hot-dipped galvanized nails provide superior rust resistance, making them perfect for exterior applications like decks, fences, and siding.
1-3/8" Drywall Nails – Ring Shank & Smooth Shank Durable drywall nails available in two options: flat head ring shank for superior holding power, and cupped head smooth shank for easy countersinking and a clean, flush finish. Ideal for fastening drywall panels to wood studs and framing in interior construction projects. Length: 1-3/8" Head Type: Flat (ring shank) / Cupped (smooth shank) Shank Options: Ring or Smooth Finish: Uncoated
Finish Nails – Bright Steel & Hot-Dipped Galvanized Durable finish nails available in bright steel and hot-dipped galvanized finishes. Stocked in 1 lb and 5 lb boxes in various sizes. Bright steel finish nails provide smooth, clean fastening for interior trim, molding, and finish work where corrosion is not a concern. Hot-dipped galvanized finish nails offer superior rust resistance, ideal for exterior trim or applications exposed to moisture.
Hot-Dipped Galvanized Roofing Nails Durable roofing nails with a heavy zinc coating for superior corrosion resistance. Designed for long-term performance in outdoor and high-moisture environments, ideal for securing asphalt shingles, roofing felt, and underlayments.
Electro-Galvanized Roofing Nails Smooth-finish roofing nails with a thin zinc coating for moderate corrosion protection. Ideal for interior or sheltered applications such as underlayments, sheathing, or light-duty roofing where exposure to moisture is limited.
Bright Duplex Nails Bright steel duplex nails feature a double head design for easy removal after temporary construction. Commonly used for concrete formwork, scaffolding, and temporary bracing where quick assembly and dismantling are required. Suitable for indoor or covered applications where corrosion is not a concern.
Roofing Nails with Neoprene Washer Roofing nails with neoprene washers are designed for securing metal and fiberglass roofing materials. The neoprene washer compresses during driving to form a tight, water-resistant seal that helps prevent leaks. A sharp point ensures smooth penetration, while the ring shank provides superior holding power and resists loosening over time. The checkered flat head reduces hammer slippage for safer, more accurate installation. Hot-dipped galvanized for excellent corrosion resistance and rated to meet or exceed ASTM A-153 standards for use with treated lumber.
High-performance siding nails designed for lasting hold and clean finishes. Made from medium-carbon steel with a spiral shank that delivers exceptional grip in wood and resists pull-out over time. The small head design seats neatly for a smooth, finished appearance. Double hot-dipped galvanized for superior corrosion resistance, these nails are ideal for hardboard siding, trim, fencing, decking, and other exterior wood applications. Typical Size: 8d (2½") Finish: Double Hot-Dipped Galvanized (StormGuard®) Made in the USA
Durable fiber cement siding nails designed for both face and blind nailing applications. Made from medium-carbon steel with a smooth shank, diamond point, and double hot-dipped galvanized coating for long-lasting corrosion protection. Ideal for securing fiber cement lap siding and trim, these nails provide a strong hold and a clean finish for exterior installations. Typical Size: 6d (2") Finish: Double Hot-Dipped Galvanized (StormGuard®) Made in the USA
Solid copper roofing nails designed for long-term durability in outdoor and marine environments. Manufactured from high-quality copper for exceptional corrosion resistance, making them ideal for use with copper flashing, slate, and tile roofing. The smooth shank drives easily without cracking materials, while the large flat head provides secure holding power and a clean finished appearance. Typical Size: 1-1/4" (3d) Material: Solid Copper Shank Diameter: Approx. 0.120" (11 gauge)
Grip-Rite® Exterior Screws are designed for dependable performance in most non-structural outdoor building projects. The exclusive PrimeGuard Plus® coating provides lasting protection against corrosion and rust, making these screws ideal for decks, fences, siding, and other exterior applications. A T-20 or T-25 star drive ensures maximum torque and reduces cam-out, while coarse threads and a self-drilling T17 point allow fast, efficient installation. The bugle head with nibs countersinks easily for a clean, flush finish every time. Protected by a 10-year limited warranty when installed correctly and tested to meet ASTM B-117 corrosion resistance standards.
GRK’s Cabinet screws are designed for fast cabinet installation with a washer-style head that seats flush which increases holding power. It's also manufactured in a #8-gauge (4 mm) diameter for universal size convenience.
The Backer-On Cement Board Screws are designed for fast, reliable attachment of fiberglass reinforced cement boards such as Durock® and WonderBoard® to wood or light-gauge steel framing. Engineered for professional performance, these screws seat flush when driven at an angle and allow installation close to edges without causing fractures or blowouts. A Stikfit recess enables one-handed driving, eliminating cam-outs and wobbling for faster, more precise work. The premium corrosion-resistant finish protects against rust, ensuring clean, long-lasting grout lines and durable installations.
The GRK R4 Multi-Purpose Framing and Decking Screws are engineered for fast, reliable installation, improving productivity on a wide range of construction projects. Ideal for general framing, remodeling, decking top boards, and structural framing, these screws are truly multi-purpose. R4 Screws perform in a variety of materials including wood, particle board, plastic, sheet metal, cement fiber board, wood decking, composite decking, and melamine, giving you versatility and confidence in every project. Designed for both strength and ease of use, these screws let you frame, build, and secure materials quickly and efficiently.
The GRK FIN/Trim Head Screws are designed for fine carpentry and precision trim work, making them ideal for window extension jambs, molding, and other detailed wood installations. Perfect for composite decks and trim applications, these screws combine strength, speed, and a clean finished appearance. Engineered with W-Cut threads and Zip-Tip points, they minimize wood splitting and allow for fast, single-step installation without pre-drilling. The Climatek indoor/outdoor coating provides corrosion resistance and is approved for use in treated lumber under ICC-ES AC257. The trim head design ensures a neat, professional look, while the precision recessed star drive offers six points of contact to eliminate stripping.
The GRK RT Composite Screw is specifically designed for attaching composite decking, trim, and cellular PVC materials with a professional, flush finish. Its reverse threading under the head prevents mushrooming, allowing the screw to sink neatly below the surface for a smooth, even appearance. Featuring a trim head and Zip-Tip point, these screws enable one-step, no-pre-drilling installation, saving time while ensuring precision. W-Cut threads reduce installation torque for fast, effortless driving, and the star drive design prevents stripping for improved productivity on every project. Coated with Climatek corrosion-resistant finish, the RT Composite Screws are suitable for interior and exterior applications, including areas with intermittent moisture, and are code-approved for use in treated lumber. Backed by a limited lifetime warranty, they deliver durable, professional-quality results for composite and PVC projects.
GRK RSS™ Rugged Structural Screw – Lag Alternative for Strong, Fast Connections The GRK RSS™ Rugged Structural Screw is a high-performance structural fastener designed for easy installation and maximum strength. Engineered as a lag screw alternative, RSS Screws drive into most woods without pre-drilling, making them faster and easier to install than conventional lag screws while providing strong, reliable connections. Featuring a Fast Bite Tip for a quick start, Zip-Tip™ technology to eliminate pre-drilling, and W-Cut™ threads for low torque and rapid driving, these screws combine speed and strength for professional applications. The Precision Fit design reduces wobble between the screw and GRK bit, improving productivity, while the Star Drive recess provides six-point contact for zero stripping. With a Climatek™ corrosion-resistant coating, RSS Screws are code-approved for treated lumber and suitable for a variety of interior and exterior structural projects.
The GRK Star Drive Bits (2" lengths, color-coded) are engineered for maximum driving efficiency and durability with GRK star drive screws. Featuring six points of contact, these bits help eliminate stripping, ensuring fast, reliable fastening and improved productivity for all your carpentry and decking projects. The color-coded design makes it easy to quickly identify bit sizes, saving time on the job site. Built for professional use, GRK Star Drive Bits provide a secure fit with GRK screws, reducing wobble and making repetitive driving tasks faster and easier.
The GRK R4 Multi-Purpose Screws (305 Stainless Steel, Star Drive) are engineered for strength, precision, and long-term corrosion resistance in the toughest outdoor environments. Designed for use in wet or coastal areas, these stainless steel fasteners are ideal for decks, docks, boardwalks, pools, and spas. Made from 305 stainless steel, R4 Screws provide exceptional durability and protection against rust and staining, even in high-moisture conditions. The Star Drive recess ensures six points of contact for superior torque transfer and reduced stripping, while the self-countersinking head and W-Cut™ thread design allow smooth, fast installation in a variety of wood types—including cedar, redwood, and ipe.
Heavy-duty lag bolts with a hot-dipped galvanized finish for superior corrosion resistance in outdoor and treated lumber applications. Designed for secure wood-to-wood or wood-to-concrete connections, providing strong holding power and long-term durability. Stocked in ¼", 5⁄16", ⅜", and ½" diameters, ideal for decks, fencing, structural framing, and other exterior construction projects.
Durable carriage bolts with a hot-dipped galvanized finish for excellent corrosion resistance in outdoor and treated lumber applications. Designed for secure wood-to-wood connections, providing strength and a smooth, finished appearance with their round head and square neck design. Stocked in ½" and ⅝" diameters, ideal for decks, fencing, timber framing, and other exterior construction projects.
Sold by the piece or box of 100. The Titen Turbo™ screw anchor delivers fast, reliable anchoring in concrete, masonry, and wood-to-concrete applications. Its innovative Torque Reduction Channel traps drilling dust to minimize binding and reduce the risk of stripping or snapping. A patented reverse-thread design ensures smooth driving with less torque while maintaining exceptional holding strength. The serrated leading edge cuts easily into tough materials, and the pointed tip allows for quick, clean installation.
Sold by the piece or box of 100. The Titen Turbo™ screw anchor features an innovative Torque Reduction Channel that traps drilling dust where it can’t obstruct thread action—significantly reducing binding, stripping, and snapping without compromising strength. Its patented reverse-thread design enables smooth driving with less torque while providing superior holding power. The Torque Reduction Channel also creates more space for dust, helping prevent anchors from bottoming out in smaller-diameter holes. A serrated leading edge cuts into concrete or masonry with ease, while the pointed tip allows fast, accurate installation in wood-to-concrete and wood-to-wood anchoring applications.
This high-strength, two-component 1:1 ratio epoxy adhesive is designed for anchoring threaded rod and rebar into cracked and uncracked concrete, including dry, water-saturated, or even water-filled holes. It delivers superior bond strength even at elevated temperatures and is qualified for use in seismic categories A through F.
